For machining complex line work at a single depth such as a logo.  See  Geometry from 2D Graphics for some info on exploiting logo images.

Define the engraving tool as 0.5mm diameter ball nose cutter and machine to 0.2mm depth.  The shank of the tool is 5.0mm – watch for collisions with side walls in cavities.

 


Activate the Engraving tool  

Work through the options and tabs in the Engraving dashboard;

  1. Drop down tool list in Tool window to select a tool from the Tool Library.  Edit Tools to create a new tool in the Tool Library
  2. Select a sketch or a Chain of Edges for the geometry
  3. Parameters tab > set appropriate tool Parameters from the Machining Parameters page – be sure to set a GROOVE_DEPTH and PLUNGE_FEED
  4. Play path